Fluke Meters
Product Code FLU,789 PROCESSMETER
Description
The Fluke 789 Process Meter is a compact digital multimeter and mA loop calibrator solution supplied with NATA accreditation.
Features include standard multimeter functions with 2 to 20mA sink and source capability, with a 24V supply, HART 250 resistor
and 20mA drive into 1200 ohms. Simultaneous mA and % of scale readout on mA output.
25% manual step plus auto step and auto ramp on mA output. Min/max/average/hold/relative modes.
Double size dual display. Accuracy, VDC 0.1% +1, VAC 0.7% +2, mA DC 0.05% +2, frequency 0.005% +1.
Product Code FLU,754
Description
The Fluke 754 is a handheld, multi-function documenting process calibrator with HART communication.
It is designed for the calibration, maintenance, and troubleshooting of test sensors, transmitters,
and other instruments. The 754 allows for the testing of all common process parameters including volts, mA,
Resistance Temperature Detectors (RTD’s), thermocouples, frequency, and ohms. Compatible with all Fluke 700Pxx pressure modules,
this device also allows for custom units, user-entered values during test, one and two-point switch testing,
square root DP flow testing, and programmable measurement delays.
Features:
• Simultaneous source and measure capabilities
• Create and run automated as found/as-left procedures
• Auto Step – set an automated sequence of steps (with a delayed start if required)
• Records and documents results
Product Code FLU,725-NATA
Description
Fluke 725 dual measure/source multifunction process calibrator. Measure DC 30 V, resistance 3200 ohm, 24mA and more.
Source/simulate DC 10 V, 24 mA, 3200 ohm, 12 types of TCs and 7 types of RTDs. Power transmitters with internal loop supply.
Split display allows view of input and output values.
Product Code FLU,1663FVF
Description
Fluke 1663 Installation Tester. Provides the following tests
Continuity test under 200mA, Loop Impedance without triggering an RCD can be set for 10,30,100,300,500,650mA & 1A.
Insulation resistance measurement under 1000V. Measure earth plug resistance by earth rods (Rods not in kit). Voltage measurements
Product Code FLU,773
Description
Measure 4-20 mA control lines, PLC loops, transmitters or any 4-20 mA line without breaking the loop.
Capable of 0-20.99 mA and 24-100 mA with clamp. Source and simulate mA and voltage signals in circuit. 4-20mA scaled o/p
Product Code FLU,1738
Description
Fluke 3 phase power logger with fluke connect mobile app. Includes 4x1500amp flex probes (1A~150A 100mA resolution 30mA accuracy)
and 4x6000amp 1m flex probes. Copy logged files to USB memory stick. Measures to 50th harmonic. Can be powered off phase one if required.
4hr backup battery operation. 1000V CAT III / 600V CAT IV. Colour Touch Screen. Displays real time waveforms and FFT.
Product Code FLU,1587FC
Description
Fluke 1587FC Insulation Multimeter will test to 2GOhms. Includes Fluke Connect capability.
50V, 100V, 250V, 500V & 1000V Insulation test capability. Using Fluke Connect can do PI/DAR, store, Temperature Compensation & VFD low-pass filter
Product Code FLU,1630-EARTH CLAMP
Description
Earth ground loop testing and continuity testing without breaking the circuit.
Ground loop resistance range 0.025ohm to 1.5KOhm. Ground leakage current measurement range 0.2mA to 1000mA. Current measurement
range 0.2A to 30A. Logs and stores measurements for on screen recall. LCD display. Battery powered.
